Four Times the Filtration Power

With the capacity to hold up to four filters at once, this four-pack of Alexapure Pro Genuine Replacement Filters will keep your water flowing at an optimal speed.

Or, if you're satisfied with using one or two filters at a time, you can store this pack as backup for when your filters need a change!

 

Filtered Water That Just Tastes Better

With the Alexapure Pro® Water Filtration System, you get filtered water that tastes better. For this and more, count on authentic Alexapure® products.

Alexapure is the only brand of gravity-fed and portable water filters we carry because we know you expect the very best. You can trust Alexapure to supply filtered water for every member of your family—we do!

 

Keep Filtered Water Flowing

The Alexapure Pro can house up to 4 filters, allowing you to increase the flow rate exponentially without sacrificing water quality. With this 4-pack of filters, you have everything you need for fast filtration!

When you notice a drastic change in the flow rate of your Alexapure Pro, it's time to change the filter(s).

Use only Alexapure Pro Genuine Replacement Filters to ensure the highest quality results. Each filter has a verified* filtration capacity of 200 gallons.

Features

• Designed for exclusive use in the Alexapure Pro Water Filtration System
• Proprietary gravity-block, ionic-absorption technology
• Silver-infused ceramic outer shell
• Ready right out of the box and no priming necessary
• Reduces 206 contaminants** commonly found in drinking water:  
  • Bacteria (> 99.9999%)
  • Chlorine (> 99.9%)
  • Fluoride (> 97%)
  • Pesticides (> 95%)
  • Pharmaceuticals (> 95%)
  • Viruses (> 99.99%)
  • Heavy metals
    
  • Lead

Click here to see independent test results of the Alexapure Pro Water Filtration System's performance.

Package Contents

• (4) full-size Alexapure Pro Genuine Replacement Filters
• (4) sets of installation hardware

 

Changing the Filter

1. Remove the lid from the upper chamber.
2. Remove the empty upper chamber, steadying the old filter in one hand.
3. Reach beneath the filter and remove the wing nut holding the unit in place.
4. Slide out the old filter and discard it.
5. Remove the new filter from its packaging.
6. Unscrew the plastic wing nut, leaving the washer in place. (This filter is packed in an alcohol and water mixture to ensure it is microbiologically sterile.)
7. Thread the stem of the filter through one of the four holes in the floor of the upper chamber, taking care to hold the filter straight.
8. Secure the filter beneath by replacing the plastic wing nut.
9. No need to pre-prime your new filter; your Alexapure Pro is ready to use right away!

 

Care and Cleaning

Each Alexapure Pro Genuine Replacement Filter provides long-term performance with little maintenance.

If you notice buildup on the surface of the ceramic filter shell, carefully remove the filter. Use a non-abrasive pad and fresh water—without soap—to clean the unit. Then, put the filter back in place.

 

Our Guarantee

We extend a 30-day, no-questions-asked return policy on unopened products. After 30 days—or for products already opened—we will review your return request on a case-by-case basis.

Our goal is to ensure you have a pleasant experience from start to finish!

  

*Capacity is determined under controlled laboratory conditions and established protocols. Your conditions may vary based on target contaminant and influent water quality.

**Chlorine reduction claims are not performance tested beyond 200 gallons. Additional performance claims are based on independent laboratory and manufacturer’s internal test data. Actual performance is dependent on influent water quality, flow rates, system design and application. Results may vary.

This system has been tested for the reduction of the substances listed in the product test data sheets. The concentration of the indicated substances in water entering the system was reduced to a concentration less than equal to the permissible limit for water leaving the system, as specified in NSF/ANSI 53. Minimum substance reductions are listed on the provided test data sheets for testing up to 200 gallons.

System and installation to comply with state and local laws and regulations. Do not use with water that is microbiologically unsafe or unknown quality without adequate testing and/or disinfection before or after the system. Manufactured from NSF/ANSI standard 61 and California Prop 65 Compliant certified coconut shell carbon and raw materials.

For the best results, store replacement filters at temperatures above 35°F. Keep the filter moist and from drying out at all times for maximum filtration capacity.

PERFORMANCE: Performance claims are based on independent lab results and manufacturer’s internal test data*. Actual performance is dependent on influent water quality, flow rates, system design and applications. Your results may vary. Performance claims are based on a complete system, including a filter and housing. This filter must be operated according to the system’s specifications to deliver the claimed performance. It is essential to follow operational, maintenance, and filter replacement requirements as directed for each application for this filter and system to perform correctly. Read the Manufacturer’s Performance Data Sheet accompanying the system and change the filter as suggested. The contaminants or other substances removed or reduced by this water filter are not necessarily in all users’ water.

WARRANTY: LIMITED LIABILITY: Alexapure, LLC makes no warranties of any kind, expressed or implied, statutory, or otherwise, and expressly disclaims all warranties of every kind, concerning the product, including, without limitation, warranties of merchantability and fitness for a particular purpose, except that this product should be capable of performing as described in this product’s data sheet. Alexapure’s obligation shall be limited solely to the refund of the purchase price or replacement of the product proven defective, in Alexapure’s sole discretion. Determination of suitability of this product for uses and applications contemplated by Buyer shall be the sole responsibility of Buyer. Use of this product constitutes Buyer’s acceptance of this Limited Liability.

Please be advised that, for returns of opened-box Alexapure Pros within the 30-day return window, a restocking fee of $75 may be incurred.